Operating Manual
| Cable And Network Analyzer System (iOS Version)
20
1.13 Channel Menu
Channel frequency stimulus is used by default on traces, See Figure 9 to Override
1. Channel menu
2. Run
Selects between trace running and stopped
3. Trace Modules
3.1 Single sweep
The highlighted trace will be swept once
3.2 Continuous Sweep
The highlighted trace will be swept continuously
3.3 All Single
All traces will be swept once.
3.4 All Continuous
All traces will be swept/repeated Continuously.
4. Add and remove traces. See Section 1.12
5. Stimulus start frequency
6. Stimulus stop frequency
7. Number of points on plot
1
4
10
9
8
5
6
7
2
3
Figure 10 Application, Channel Menu
11
1.13.1 Channel Menu Options