Introduction
Warnings
All the information you need to know and the warnings regarding single phase controlled
VARko-112-TFT reactive power factor controller is described in the user manual.
Prior to taking the circuit for the device read this booklet carefully for your system and your own
safety. Do not act without getting touch with our company for the issues that can not be
understood.
Tel:
0090.232.877 14 84 (pbx) Fax: 0090.232.877 14 49
Factory:
Atatürk mah. 78 sok. No:10 Ulucak köyü, Kemalpaşa - İZMİR
1-
The device should be commisioned and programmed by the authorized and certificated
personels. If necessary, checks should be made by that person again.
2-
As compensation is a complex system, subscriber' s system are advised to keep under
control by licensed - professional electrical engineers and technicians that company owned or
agreed.
3-
Do not open the device and not let it open. There are not any parts in the device that the
user or someone can cut in.
4-
Prior to making electrical connections to the terminals of the device, make sure that there is
no energy in the cable and terminals. There shouldn' t be energy at the control panel.
5-
Do not use the device for different purposes other than compensation system.
6-
Fix the device tightly on the control panel with the apparatus given on the device without
hanging around.
7-
Do not interfere to the keys on the front panel with an object other than your fingers.
8-
Wipe your device with dry cloth being sure to disconnect the power. Water or chemicals used
for cleaning damage to the device.
9-
Make sure that the terminal connections are made in accordance with the connection
scheme and without causing contact problem (loose binding or multiple copper cables touching
to each other, etc.), prior to commissioning (supplying energy) of your device.
10-
Use compensation contactors compatible to the power of the capacitor in your compensation
system. Select the fuses in the power line of the capacitor compatible to the current of the
capacitor.
11-
Select the current value of the fuses connected to the C1 and C2 terminals which are input of
contact phase considering the sum of the current drawn by the coils of connectors in each group
(senary). In case of using connector with high current coil, auxiliary relay must be used to prevent
damage to the contact outputs of the device.
12-
The alerts and the warnings above are just for your security. In case of not applied, KAEL
Elektronik Ltd. or its seller is not responsible for undesirable conditions.
