Kaden Installation Manual |
13
Step 4: Adjust the air inlet direction
(from rear side to under-side)
1. Take off the ventilation panel and flange.
Fig. 4.12
2. Change the mounting positions of the ventilation panel and
air return flange.
Fig. 4.13
3. When installing the filter mesh, fit it into the flange as
illustrated in the following figure.
Fig. 4.14
Note
All the figures in this manual are for demonstration
purposes only. The air conditioner you have purchased
may be slightly different in design, though similar in shape.
Step 5: Adjust the air inlet direction
Dimension:
Model KDI24
Duct joint for fresh air dimensions
Fig. 4.15
Air return flange
Ventilation panel
Ventilation panel
Air return flange
Duct joint for fresh air
Ø125mm
Ø160mm
