12
| Kaden
Wired Controller Manual
8. Operation
Set the current day and time
Remote signal receiving function
The wired controller can be a remote signal receiving device,
you can use the wireless remote controller to control the
air-conditioner through the wired remote controller when the
system has been powered on.
1. Press the TIMER button for 3 seconds or more.
The timer display will flash.
TIMER
3. The day setting is finished and the time setting is ready
to set after pressing TIMER button or if you don’t press a
button in 10 seconds.
TIMER
5. The setting is done after pressing TIMER button
or if you don’t press a button in 10 seconds.
TIMER
2. Press the button “+” or “–” to set the day.
The selected day will flash.
4. Press the button “+” or “–” to set the current time.
Press repeatedly to adjust the current time in 1-minute
increments. Press and hold to adjust the current
time quickly.
ex.Monday AM 11:20
To start/stop operation
Press the POWER button.
Operation lamp
Air conditioner ON: Lit brightly
Air conditioner OFF: Not lit
POWER
To set the operation mode
Mode setting
Press the MODE button to set the mode.
MODE
Room temperature
Press the button “+”or “–” to set the room temperature.
Indoor Setting Temperature Range: 17~30ºC
Lower Higher
Fan speed setting
Press the FAN SPEED button to set the fan speed. (This button
does not work when in Auto or Dry mode.)
FAN
SPEED