Kaden KCS Series, Owner'S Manual

Page: 7 / 16

Kaden Owner’s Manual | 7
Other features
Default setting
When the air conditioner restarts after a power failure, it will
default to the factory settings (AUTO mode, AUTO fan, 24°C
(76°F)). This may cause inconsistencies on the remote control
and unit panel. Use your remote control to update the status.
Auto-restart
In case of power failure, the system will immediately stop.
When power returns, the Operation light on the indoor unit
will flash. To restart the unit, press the
ON/OFF
button on the
remote control. If the system has an auto restart function, the
unit will restart using the same settings.
Three-minute protection feature
A protection feature prevents the air conditioner from being
activated for approximately 3 minutes when it restarts
immediately after operation.
Louvre angle memory function
Some models are designed with a louvre angle memory
function. When the unit restarts after a power failure, the angle
of the horizontal louvres will automatically return to the previous
position. The angle of the horizontal louvre should not be set
too small as condensation may form and drip into the machine.
To reset the louvre, press the manual button, which will reset
the horizontal louvre settings.
Refrigerant leak detection system
In the event of a refrigerant leak, the LCD screen will display
“EC” and the LED indicator light will flash.