background image

 

IMPORTANT SAFETY INSTRUCTIONS 

 

 

WARNING

 

 
To reduce the risk of fire, electrical shock, or injury 
when using your appliance, follow these basic 
precautions:

 

 

 

Read all instructions before using the Wine Cooler. 

 

DANGER or WARNING:

  Risk of child entrapment.   

Child entrapment and suffocation are not problems of the past. Junked or abandoned 
appliances are still dangerous . . . even if they will “just sit in the garage a few days”. 

 

Before you throw away your old Wine Chiller: 

Take off the door.  Leave the 

shelves in place so that children may not easily climb inside. 

 

Never allow children to operate, play with, or crawl inside the appliance. 

 

Never clean appliance parts with flammable fluids.  The fumes can create a fire 
hazard or explosion. 

 

Do not store or use gasoline or any other flammable vapors and liquids in the vicinity 
of this or any other appliance.  The fumes can create a fire hazard or explosion. 

 

-Save these instructions-

 

  

 

INSTALLATION INSTRUCTIONS 

 

 

Before Using Your Wine Chiller 

 

Remove the exterior and interior packing. 

 

Before connecting the Wine Cooler to the power source, let it stand upright  for approximately 2 
hours. This will reduce the possibility of a malfunction in the cooling system from handling during 
transportation. 

 

Clean the interior surface with lukewarm water using a soft cloth. 

 

Install the handle on the left side of the door. 

 

When  replace  the  illuminating  lamp,  please  select  the  lamp  which  comply  with  the  rated  power 
input of lamp according to the rating label. Shut off the power supply before replacing the lamp. 

 

When disposing your appliance, please choose an authorized disposal site. 

 

 

Installation of Your Wine Chiller 

 

 

This

 

appliance is designed to be for free standing installation or built-in (fully recessed).

 

 

Place your Wine Cooler on a floor that is strong enough to support it when it is fully loaded. To 
level your Wine Cooler, adjust the front leveling leg at the bottom of the Wine Cooler. 

 

Locate  the  Wine  Cooler  away  from  direct  sunlight  and  sources  of  heat  (stove,  heater,  radiator, 
etc.).  Direct  sunlight  may  affect  the  acrylic  coating  and  heat  sources  may  increase  electrical 
consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly. 

 

Avoid locating the unit in moist areas.  

 

Plug the Wine Cooler into an exclusive, properly installed-grounded wall outlet. Do not under any 
circumstances  cut  or  remove  the  third  (ground)  prong  from  the  power  cord.  Any  questions 
concerning  power  and/or  grounding  should  be  directed  toward  a  certified  electrician  or  an 
authorized  Products service center. 

 
 
 
 

 

Summary of Contents for KA45WR








Reviews: