12
To view the “Set” temperature (anytime) press and hold the corresponding button, the “Set” temperature
will temporarily “flash” in the LED display for 5 seconds.
The
controls
of your Wine chiller (the Lower zone)
“Up” Button
Used to raise(warm) the temperature in 1
℃
.
“Down” Button
Used to lower(cool) the temperature in 1
℃
.
“Lower chamber”
To shows the temperature of the lower compartment.
Setting the Temperature Control
To set the temperature:
Connect the power cord to a properly grounded outlet.
Set the desired cooling temperature by pressing the buttons adjacent to the “UP/DOWN” program. Each
depression of the buttons will scroll through the available temperature settings in increments of 1 degree.
The temperature selected will flash in the LED display for approximately 5 seconds, then revert back to
display the temperature of the internal chiller to set the temperature.
The temperature setting can be adjusted from 10
℃
to 18
℃
NOTE:
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the unit.
If you attempt to restart before this time delay, the Wine Chiller will not start.
When you use the wine chiller for the first time or restart the wine chiller after having been shut off for a
long time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and it is due to the length of the activation time. Once the
wine chiller is running for a few hours everything will be back to normal.
Door Lock (not for KA24WR)
Your unit is provided with a lock and key combination.
The keys are located inside the plastic b
ag that contains the User’s Guide. Insert the key into the lock and
turn it counterclockwise to unlock the door. To lock the door, do the reverse operation making sure metal pin
is engaged completely. Remove the key and place it in a secure place for safekeeping.
Note: During periods of high humidity, some condensation may appear on outside surfaces of cooling
appliances. This condensation will disappear when humidity levels drop. For prevention it is advisable to install
the appliance with sufficient ventilation in a dry and/or an air-conditioned room. Please ensure that doors are
closing and sealing properly.
Temperature Memory Function
If the power is suddenly lost, the set temperature will be saved by the unit. Once the power is back on,the
unit will be at the same set temperature.
