Kaco blueplanet 40.0 TL3, Instruction Manual, Page: 30 / 52

Configuration and Operation
Page 30 Installation Instructions KACO blueplanet 32.0 TL3 / 40.0 TL3 / 50.0 TL3
8.2 Initial commissioning
When started for the fi rst time, the inverter displays the confi guration assistant. It takes you through the settings neces-
sary for the initial start-up.
NOTE
After confi guration is completed, the confi guration assistant does not appear again when the inverter is
restarted. You can then change the country setting only in the password-protected parameter menu. The
other settings can still be changed in the Settings menu.
NOTICE
The sequence of the settings required for initial commissioning is preset in the confi guration assistant.
Initial confi guration

In order to select a setting, press the up and down buttons.

To select the next menu item, press the OK button.

To return to the most recently selected menu item, press the ESC button.

Set the required settings.
Press the OK button in the last menu item.
» You have completed the initial confi guration. The inverter begins to operate.
8.3 Menu structure
8.3.1 Display on the LCD
1
3
4
2
Figure 22: Main menu
Key
1 Selected menu item 3 Menu items of the active menu level
2 Name of the active menu level 4 Menu items of the next lower menu level
8.3.2 Menu structure
Icons used: