11
12
—Attaching—
—Removal—
3
OPTION
Pinlock
®
Original Insert Lens
For CM-2-P
Pinlock
®
Original Insert Lens prevents the shield from fogging caused by thermal
changes in winter or rainy weather etc.
Maintaining the proper space between the shield and the Pinlock
®
Original Insert Lens
provides clear vision by balancing the inner and outer temperature.
Pinlock
®
Original Insert Lens is the effective anti-fog sheet. The shield of your helmet is
equipped with the Pinlock
®
pins (eccentric pins) which allows the exclusive Pinlock
®
Original Insert Lens to be attached to it. The Pinlock
®
Original Insert Lens is available to
purchase at the dealers.
Original Insert Lens
Pinlock® Original Insert Lens has international patent
protection and is a registered brand name of Pinlock®
fog-free systems B.V.. Further patents have been applied for.
Apply the silicon seal side of the Pinlock
®
Original Insert Lens on inside the shield,
without peeling off the protective film on the lens. At the time, apply the Pinlock
®
Original Insert Lens on inside the shield by clicking it into the eccentric pins.
(Fig 1 and 2)
①
（Fig. 2）
（Fig. １）
Section view
Protective film
Silicon seal
Shield
Inside the shield
Pinlock
®
Original Insert Lens
Flex the shield carefully until the shield becomes flat .Then, click the other side of
the Pinlock
®
Original Insert Lens into the eccentric pins and then allow the shield to
return carefully to its original curved shape. (Fig. 3,4,5)
②
（Fig. 3）
（Fig. 4）
*
Flex the shield when applying the
Pinlock
®
Original Insert Lens into
the eccentric pins.
Silicon seal
Make sure if the overall silicon seal of the Pinlock
®
Original Insert Lens is attached
firmly to the shield by mounting the shield on the helmet. If there is any space
between them, refer to “How to Adjust Pinlock
®
Original Insert Lens after
Attachment” and adjust the lens.
③
*Please mount the shield on the helmet when checking if the Pinlock
®
Original Insert Lens is
attached firmly to the shield. Otherwise, the shield might be spread out by the pressure from the
lens and it cannot be assured if the lens has attached on the shield firmly.
Fig. 5
Shield
Silicon seal
Pinlock
®
Original Insert Lens
Correct
Wrong
Protective film
Shield
Section view
of the shield
Eccentric pins
Silicon seal
*without any space
Make sure the Pinlock
®
Original
Insert Lens to be fit inside the chase.
Peel off the protective film on the Pinlock
®
Original Insert Lens.
④
Remove the shield from the helmet.
Remove the Pinlock
®
Original Insert Lens from
the eccentric pins with flexing the shield.(Fig.6)
①
②
Remove the shield from the helmet and detach
the Pinlock
®
Original Insert lens from the
shield.
Adjust the eccentric pins by turning them with
a tool. (Fig. 7)
Fit the Pinlock
®
Original Insert Lens back on
the shield. Make sure the Pinlock
®
Original
Insert Lens and the shield do not have any
space in-between after attaching the shield on
the helmet. If there is any space please follow
the same steps again.
①
②
③
—How to Adjust Pinlock
®
Original Insert
Lens after attached it to the shield—
Fig. 6
Fig. 7
Face the eccentric pins inwards
Face the eccentric pins outwards
Facing the eccentric pins inwards
Facing the eccentric pins outwards
Adjust the Pinlock
®
Original Insert Lens if there
is any space between the lens and the shield.
* Please read carefully the next page.
so that the Pinlock
®
Original Insert Lens will be pushed
out and there would not be any space between the
Pinlock
®
Original Insert Lens and the shield.
so that the Pinlock
®
Original Insert Lens
will be loose.
Pinlock
®
Original Insert
Lens is pushed out so
that it will be in close
contact with the shield.
Pinlock® Original Insert
Lens becomes loose fit.
