Kabuto FARO, Instruction Manual

Page: 15 / 20

Please refer to Parts List on our website for more information about
replacement.
WARNING!
Replacement XF-3/ Cranium-Lock Pin
XF-3 and Cranium-Lock pins are available as replacement.
Replacement/ XF-3
Replacement/ Cranium-Lock Pin Set
Attention!
Do not apply extreme pressure to the XF-3 as this will cause
damage. Please remove Cranium-Lock pins before changing the
position of it.
Attention!
Each KABUTO adjuster including XF-3 is designed for each specific
model. Please make sure to purchase the proper adjuster for your
helmet as replacement.
You can change the angle of the XF-3 at 4 levels and feel
comfortable to fit on your head.
#Please set the lock pins of the
XF-3 in the holes of the helmet
before use.
To adjust the angle of the XF-3
Remove the XF-3 from the
helmet and reset the lock
pins in other holes of the
XF-3 to change the angle.
Set the XF-3 with the pins
in the holes of the helmet.
#
When changing the angle of
the XF-3, make sure to set the
lock pins in each hole
horizontally.
How to remove XF-3 Sweat Pad
XF-3 Sweat Pad is removable and washable.
Please see the figure (left).
XF-3
Hook-and-loop fastener
Sweat Pad
Make sure to attach the Sweat Pad when using XF-3.
Your hair may be tangled when turning the Adjuster dial.
To adjust the position of
the XF-3
Lock pin
(Pull this to remove)
Lock pin
Adjusting angle
hole:
This hole is the
average position but
you can choose your
own angle!
XF-3
Lock pin hole
http://www.ogkhelmet.com/