Kabuto AERO-R2 Series, Instruction Manual

Page: 54 / 74

10. How to install A.I. Net
A.I. (Anti-Insect) Net
•Protection against insects from Air-intake
•For a person who values fitting
•Reducing air introduction in the winter
A.I.
(Anti-Insect)
Net
A.I. nets have a front and back side,
and the fluffed side is the back side (helmet side).
Front
Front pad Front pad
Mount
(4 points)
Front pad
Pull forward while holding down
the temple guide.
Mount Mount
Temple guide Temple guide
① Before the attachment, please detach the inner pads.(Front pad,Top pad)
�To remove the A.I. Net from the helmet, make sure to remove the front pad and top pad and temple
guide first.
�To attach the adjuster onto the mounting part, make sure the position of the mounting part. Wrong
positioning at the attachment may lead to the damage of the liner and/or the fall of the adjuster.
�To attach the adjuster, make sure to attach it correctly. If the laces are twisted and attached,
adjust may not work properly and may lead to the damage of the adjuster.
The front pads are secured with a snap system.
Firmly hold the Front Pad at the parts attached to the mounts indicated
by the circles ( ) and pull it toward you to remove it from the helmet.
*There are four mounts.
CAUTION
17