Kabuto AERO-R2 Series, Instruction Manual

Page: 50 / 74

7. Changing the KBF-2 Adjuster height
AERO-R2 is available to change the adjuster height by eight levels for fine fitting.
①
Hold the root of the arm, then pull out
the arm end.
②
Set the height of the arm on the same level left
and right, then push the ends in to the holes.
Mount Mount
Arm Arm
Set on the same level (left and right) Set on the same level (left and right)
Do not twist or forcibly pull out to prevent the damage.
To pull out the end of the arm, make sure to hold the root of the end, then pull out slowly.
CAUTION
13