KABTRONICS World Clock, Operating And Assembly Manual

Page: 8 / 37

K A B T R O N I C S A S S E M B L Y I N S T R U C T I O N S
World Clock Kit Page 8
Clip the leads off just above the solder joint; don’t dig into the solder joint. Soldering and clipping
won’t be mentioned again, you need to do it for each part as you load it.
( ) load the diode into the space marked D1, be sure to line up the white line on the diode with
the white line on the board.
( ) load the eight 24 pin SAA1064 ICs. The notch on IC should match the notch on the board.
( ) load the 18 pin socket at location U1, match the mark on the board with the mark on the
socket.