har
dw
ar
e k
e
y
A
A
B
C
D
centre line
97mm
122mm
front of base cabinet
centre hole
centre hole
st
ep 2
p.
2
Ver. 3
W-50552
1.
brackets
25mm
wood screw
16mm
wood screw
bin frame
pre-drilling for brackets
securing frame and brackets
measuring up for brackets
3.
2.
4.
3x10L
base mount pullout bin
On the base of the cabinet mark out a parallel line in the middle
of the cabinet. Then mark out 61mm from the centre line both
sides. Lastly, mark out a line 97mm from the front edge
of the cabinet as pictured above.
Further secure the bin frame and the brackets to the cabinet
using 16 x 16mm wood screws (D) as pictured above.
attaching frame and brackets
Align the bin frame (A) and the brackets (B) with the pre-drilled
holes as pictured above and fix through the centre hole to the
cabinet using 6 x 25mm wood screws (C).
C
C
D
B
97mm
Pre-drill front holes using a 2mm drill bit to a depth of roughly
2.5mm where the lines cross. Align front frame with predrilled
front holes and mark out position of rear fixing holes.
Pre-drill rear holes.
