kaboodle.com.au
A
har
dw
ar
e k
ey
B
3.
A
(i)
(ii)
runners
x 1 pair
A
p.
2
Ver. 2
W-50531
st
ep 2
1.
477mm
422mm
422mm
477mm
192mm
37mm
37mm
288mm
229mm
229mm
400mm
475mm
475mm
400mm
288mm
192mm
16mm
wood screws
pre-drilling for runners
separating runners
attaching runners
pre-drilling for lid brackets
3.
2.
4.
2 x 31L
side mount pullout bin
B
A
On both sides of your cabinet, draw a horizontal line 477mm up
from the bottom. Measuring from the front of the cabinet along
these lines, mark out the pre-drill holes at 192mm, 288mm and
400mm as pictured above. Use a 2mm drill bit to pre-drill holes
to a depth of roughly 2.5mm.
Separate each runner (A) into two parts by extending the guide
(i) and pushing up on the lever (ii) while continuing to pull apart
the two components. The guide should separate easily from the
runner without too much force being applied.
Using the lower sets of pre-drilled holes, align with the holes
on the runners (A) and fix to the cabinet using 6 x 16mm wood
screws (B) as pictured above.
On both sides of your cabinet, draw a horizontal line 422mm up
from the bottom. Measuring from the front of the cabinet along
these lines, mark out the pre-drill holes at 37mm, 229mm and
475mm as pictured above. Use a 2mm drill bit to pre-drill holes
to a depth of roughly 2.5mm.