step 1
step 2
step 3
step 4
timber support rail
360mm
Caution:
Please ensure all cabinets are
screwed into your timber stud wall using
a minimum of 65mm timber screws.
If attaching to concrete, brick, steel or
any other substrates seek advice from
your hardware specialist.
B
setback
Then follow the
instructions to fit
your doors and
panels.
Finish off your
Kaboodle Kitchen
by installing your
benchtop.
Next grab your
parts and
accessories
instructions.
Your Kaboodle
cabinet is now
complete.
800mm
slimline cabinet
st
ep 1
har
dw
ar
e k
e
y
p.
3
Ver. 9
W-51630
Caring for your kaboodle cabinets
Looking after your cabinets is really easy and with the right care and maintenance they
will last you for many years. Just follow these simple steps and if you need any more
information you can contact us: Australia:
1800 666 078
Monday to Friday between 8:00am
and 6:00pm AEST. New Zealand:
0800 522 663
Monday to Friday between 8:00am and
5:00pm NZST or email:
.
Clean your cabinets with an all purpose, non-abrasive cleaner with a damp sponge or cloth
and make sure you never use saturated cloth, harsh chemicals or thinner based cleaners
as these will damage the surface of the melamine. Likewise, never use products that will
scratch the surface like steel wool or wire brushes and avoid sharp objects that will scratch,
cut or gouge the melamine surface. If this happens the internal board will be exposed and
may swell. Kaboodle cabinets are water resistant but not water proof so any spills should
be attended to immediately.
Handy hint:
if the melamine surface of your cabinet is damaged you can try and cover it
with a furniture repair crayon but just remember that this won’t seal the board back to its
original finish.
We offer a dedicated customer service line
for advice or any questions you may have
on kaboodle products.
Call customer service on:
Australia:
1800 666 078
Monday to Friday
between 8.00am and 6.00pm AEST
New Zealand:
0800 522 663
Monday to Friday
between 8.00am and 5.00pm NZST or email:
28mm
wood screws
B
1.
1.
fixing cabinet to wall
overhead fridge cabinet
To install your cabinet to sit flush with the
top of a pantry attach a timber rail first to
help support the cabinets. The rail should
be installed so the top of the rail is 360mm
from the top of the pantry.
Make sure the rail is level when fixed to
the wall. Sit the cabinet on the rail, pre-drill
and screw into the wall with the appropriate
fixings.
Use the slimline cabinet to create an
overhead fridge cabinet.
Pre-drill and attach the slimline cabinet
between 2 x pantry end panels.
Ensure the cabinet is flush with the top
of the end panels.
Note:
use the assistance of another
person to help hold the cabinet while
fixing it to the wall.
Note:
Set the slimline cabinet back from
the front of the end panels 18mm for the
melamine doors and 20mm for the
thermoformed doors.
pantry
end panel
pantry
end panel
