har
dw
ar
e k
e
y
A
B
D
C
E
lid brackets
m4 8mm
screws
16mm
wood screws
bin frame
p.
3
Ver. 2
W-50532
st
ep 2
attaching bin frame
inserting bin lid
7.
8.
E
D
Slide the back plastic catches of the bin lid along the top of the
lid brackets until both plastic catches fall into the channels at
the back. The front two plastic catches should fit into the front
channels at the same time.
reassembling runners
attaching lid brackets
5.
6.
Carefully slide the guide back into the runner. The runners
should open and close smoothly if assembled correctly.
Extend the runners once they have been correctly reassembled.
B
C
Using the top sets of pre-drilled holes, align with the 2nd, 5th
and 7th holes on the lid brackets (C) and fix to the cabinet using
6 x 16mm wood screws (B) as pictured above.
2 x 27L
side mount pullout bin
Place the bin frame (D) carefully onto the extended
runners, aligning the holes and then securing into place
with the 4 x M4 8mm screws (E).
Note:
Support the runners
from underneath when screwing the frame into place.
Do not tighten screws.
