2020
0434.000.01.01.01
6
2
Safety
This technical document contains detailed explanations of how to safely and properly connect, start,
operate and monitor the product.
•
Read this technical document carefully and thoroughly to get to know the product.
•
This technical document is part of the product.
•
Especially read and observe the safety instructions in this chapter.
•
Observe the warnings in this technical document to prevent function-related hazards.
•
The product is manufactured according to the state of the art. Nonetheless, when it is not used as
intended, hazards can a
rise to the user’s life and limb, or damage can occur to the product or
other property.
2.1
Intended use
The product is for measuring the length of windable goods, such as cables, leads, wires, ropes, tapes,
hoses or pipes. The smallest permissible bending radius according to the specifications of the material
must be observed.
If a product is equipped for special applications, it is only designed to measure the material specified
in the sales contract.
Any other use is considered improper use.
Info
Th
e measuring device’s conformity assessment applies only to the materials shown in
This product poses no hazard to people, property or the environment when it is used properly and the
requirements and conditions in this technical document and the warnings posted on the product are
obeyed.
The following is considered intended use:
•
Operate the product according to this technical document, the agreed delivery conditions and the
technical data.
•
Make sure that all required work is done only by qualified personnel.
•
Use the included equipment and special tools exclusively for their intended purpose and as speci-
fied in this technical document.
•
Operate the product only if it is in technically perfect condition and displays no faults.
The owner bears sole responsibility for any injury or property damage occurring due to improper use
of the product.
