12
E-730/630/750/79E/ RT Series Installation Guide - PK3677_T_04_16
1. Insert the cylinder(D) or equivalent tool into the
override shaft and turn it 90º clockwise so that
the two small indents on the cross are now ver-
tically in line. (Fig.1)
2. Push in the lever catch firmly. (see Fig. 2)
(C)
(A)
(B)
(D)
Fig. 1
Fig. 2
lever catch
!
Important:
Assemble the lever, cylinder and
lock components before affixing the entire
unit to the door.
(A) The small indents on the cross of the over-
ride shaft in line horizontally
(B) The nylon washer and the spring washer
(not for lever feel) on the drive tube
(C) The lever catch in the out position
(D) Cylinder and 2 keys for 630 K/C included in
the hardware bag
1
Upon unpacking, the lock housing with mechanical override should look like
the diagram below with:
2
Preparing the outside housing for the installation of the lever handle
