Kaba B-Net 93 60 User Manual Download Page 9 | Manualshive

Page: 9 / 50

background image

User Manual B-Net 93 60

Safety regulations

01/2006

© Kaba Benzing GmbH

9

2.5

ESD (Electro Static Discharge) protective measures

CAUTION

Danger for electronic components due to electrostatic discharge.

Improper handling of printed circuit boards or components can cause damages that
lead to complete failures or sporadic errors.

During installation and repair of the device, the ESD protective measures must be
considered.

Please consider the following guidelines before the installation or maintenance of
the device:

•

If you deal with electronic components, always carry a wristband for the
protection against electrostatic discharge. Connect one part of the wristband
with a discharge socket or an unvarnished grounded metal component.

•

Only touch the printed circuit boards at the edges. Do not touch the printed
circuit board itself or the connector.

•

Place all dismantled components on an anti-static surface or in a static-proof
container.

•

Avoid contact between printed circuit boards and your clothing. The
wristband only protects the printed circuit boards against electrostatic
discharge from the body, but there is still a risk of damage through
electrostatic discharge from your clothing.

•

Only transport and dispatch dismantled modules in protective bags.

«
...
7
8
9
10
11
...
»

Summary of Contents for B-Net 93 60



















































Reviews:

No comments

Related manuals for B-Net 93 60

Brand: EC Line Pages: 21

Brand: EC Line Pages: 20

Back Office Suite

Brand: Inepro Pages: 248

Brand: XtendLan Pages: 70

AKI-CDC-MOD-12T

Brand: Kollmorgen Pages: 36

Basic Line 2012

Brand: sks Pages: 29

Brand: Dasan Networks Pages: 2

Brand: Roger Pages: 40

Brand: Royal Pages: 12

Brand: WideFly Pages: 16

Brand: PairGain Pages: 28

Brand: ZKTeco Pages: 45

Brand: TEAMSable Pages: 11

Brand: Harris Pages: 27

Brand: National Instruments Pages: 21

Brand: National Instruments Pages: 10

Brand: Tunstall Pages: 16

Brand: SICK Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands