Glossary
User manual
44
k1evo809en-2014-04
Kaba programmer 1460
9
Glossary
Battery
A battery is an storage device for elec-
trical energy.
Actuators
The term actuator means a mechatron-
ic component which is installed in a
door or door frame and which can be
opened by authorised media.
Logging in
Logging in means the authorisation of
a programming master with which ac-
tuator settings can be changed.
Firmware update
A firmware update consists of updat-
ing the software on the actuators.
Kaba evolo Manager
Kaba evolo Manager is software to
configure and manage various types of
actuators in one or more locking sys-
tems.
Configuring
Configuring is modifying settings in
the actuators.
Charge status
The charge status is a display of the
current remaining charge of a battery.
Mechatronic components
Mechatronic components are actua-
tors (see actuators).
NFC
"Near Field Communication" is a trans-
fer standard for remote exchange of
data over short distances.
Programming master
Programming masters are media with
a high level of authorisation, used to
program lower-ranking user media
and modify the settings in actuators.
Programming
Programming consists of saving the
configurations from the Programmer
onto the actuators.
Stand-alone
The term stand-alone refers to all actu-
ators which are installed independent-
ly in doors or door frames, however
can equally be grouped into a locking
system and fed to a management sys-
tem.
Traceback
A Traceback is an event log of all con-
nections made, authorisations trans-
ferred, access attempts and successful
accesses.
