Kaba Mauer GmbH
82021 Code-Combi K
Page 10
GB
4 Lock
functions
The lock should only be programmed with the lock and safe opened.
The works primary code is
1 2 3 4 5 6
. No secondary code is set by works.
secondary
code
primary code
4.1 Opening with primary or secondary code
1) Press
ON
2) Enter valid 6-digit primary or secondary code
1 x
3) Within 4 seconds turn bar handle clockwise until stop position reached
If the lock was last opened with a different code, the signal
3 x
appears.
4.2 Opening after 3 or more incorrect code entries
penalty time
After 3 incorrect entries the lock goes into a one minute blocked status. The period in which
the lock is blocked is extended to 2, 4, 8 and a maximum of 16 minutes every time an
incorrect code is entered. During this period the red LED fl ashes every second and it is not
possible to enter any further codes. When the blocked period is over,
ON
may be pressed
again at any time.
1) Press
ON
2) Enter valid 6-digit code
1 x
Signal: Invalid 6-digit code was entered during former opening attempt
3 x
3) Within 4 seconds turn bar handle clockwise until stop position reached