kas.com.au
6
Verison: UG_V002
•
Ensure the rubber gasket cover is on both sides of the locks
•
Take the front handle and place it on the door, ensuring all screws
and holes line up. Place the wires from the lock through the rubber
gasket and through door hole to ensure no pinching of the wires
and a flush covering [Image B]
•
Insert spindle into the front handle ensuring it is inserted into the
lock properly. Spring end is at the back of the lock
•
Place the Back plate frame onto the back of the door and screw into
place [Image D]
•
Connect and line up the back handle to fit the spindle, screw into
place (spring should be to the back of the lock)
•
Gently connect the wire together [Image C]
