K3C AC 1900, Quick Installation Manual

Page: 14 / 15

HEED SERVICE MARKING
Except as explained in the user manual, do not repair any product
yourself. Service needed on components inside the device should be
done by an authorized service outlet or provider.
Phicomm (Shanghai) Co., Ltd. is entitled to use new or reconditioned
replacements parts or boards for repairs under warranty, provided they
have the same functionality as the parts to be replaced.
DAMAGES REQUIRING SERVICE
Under the following conditions, unplug the device from electrical outlet
and contact an authorized service center or provider:

Liquid has been spilled or an object has fallen onto the device.

The product has been exposed to rain or water.

There are noticeable signs of overheating.

The product does not operate normally when you follow
operating instructions.
AVOID HOT AREAS
The product should be placed away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that
generates heat.
AVOID WET AREAS
Never use the product in a wet location.
AVOID USING YOUR DEVICE AFTER A DRAMATIC CHANGE IN
TEMPERATURE
Condensation may form on or within the device when it is shifted
between environments with very different temperate and /or humidity
range. To avoid damaging the device, allow sufficient time for the
moisture to evaporate before using the device.
NOTICE : When taking the device from low-temperature conditions into a
warmer environment or from high-temperature conditions into a cooler
environment, allow the device to acclimate to room temperature before
turning on power.
AVOID PUSHING OBJECTS INTO THE DEVICE
Never push objects of any kind into cabinet slots or other openings in the
product. Slots and openings are provided for ventilation. These openings
must not be blocked or covered.
MOUNTING ACCESSORIES
Do not use the product on an unstable table, cart, tripod or bracket. Any
mounting of the product should follow the manufacturer’s instructions,