K2L MOST150, User Manual, Page: 23 / 24

MOST150 E-O Converter
© 2015 - 2017 K2L GmbH & Co. KG 23 DS60001342C
K2L - USER’S GUIDE
Chapter 7 Revision History
Table 7.1 Customer Revision History
REVISION LEVEL&
DATE
SECTION/FIGURE/
ENTRY CORRECTION
DS60001342C
(06-23-17)
Cover Sheet Barcode change
DS60001342B
(04-05-17)
Section 1.2, "Scope of
Delivery," on page 5 Added:

Converter cable Fakra to SMA
Section 1.4, "Definitions of
Terms," on page 8 Added:

BCI, PCB, RE, SMA
Chapter 2, "Introduction," on
page 9 New sections.

Section 2.1, "Steps How To Connect the
Devices"

Section 2.2, "Test Report"
Section 3.1, "Charger and
Battery Operation" Description improved:

Added sentence that recommends to not connect
the MOST150 E-O Converter to a power supply
in the middle of a test.
Section 3.2, "Physical Layer
Conversion," on page 14 Output optical power value

corrected:62.5/125 µm fiber -> 50/125 µm fiber
Section 4.1, "Front Panel,"
on page 15 Electrical connectors:

Added: GND connector

Exchanged: Fakra to SMA
Section 4.1.2.3, "Charger,"
on page 17
, Section 4.1.2.4,
"Power," on page 17
Icons adapted in the table.
Section 4.1.2.4, "Power," on
page 17

Icons adapted in the table.

Values changed for orange (3.0 V -> 3.6 V),
green (3.0 V -> 3.6 V) and red (3.0 V -> 2.8 V).
Section 4.2, "Rear Panel,"
on page 18
Internal connector added.
Section 5.3, "Optical
Characteristics
(Interconnect)," on page 21 Output optical power value corrected:

62.5/125 µm fiber -> 50/125 µm fiber
DS60001342A
(07-02-15)
Initial Version