K2L MOST150, Manual, Page: 9 / 15

MOST150 C-O Converter
K2L MOST150 C-O Converter V1.0 9 Revision 1.0 (06-17-13)
K2L - USER MANUAL
Chapter 3 Hardware Description
3.1 Coaxial Electrical Panel
Figure 3.1 depicts the coaxial electrical panel of the MOST150 C-O Converter.
Figure 3.1 Coaxial Electrical Panel
All components of the coaxial electrical panel are described in Table 3.1 from left to right.
How the MOST150 C-O Converter can be connected is described in Chapter 5, "Typical Use Case -
Connection Diagram," on page 12 .
Table 3.1 Interfaces on the Coaxial Electrical Panel
INTERFACE COLOR DESCRIPTION
LED Red MOST150 C-O Converter is powered.
Green If the MOST150 C-O Converter is powered and a MOST signal has
been detected in the MOST150 system basing on cPHY, the LED
switches to green.
Coaxial out - Coaxial Tx interface to be connected to the MOST150 system basing
on cPHY. For details refer to Section 4.2, "Coaxial Connector," on
page 11 .
Coaxial in - Coaxial Rx interface to be connected to the MOST150 system basing
on cPHY. For details refer to Section 4.2, "Coaxial Connector," on
page 11 .
LED Coaxial out Coaxial in