K2L MOST150, Manual, Page: 5 / 15

MOST150 C-O Converter
K2L MOST150 C-O Converter V1.0 5 Revision 1.0 (06-17-13)
K2L - USER MANUAL
Chapter 1 Preface
1.1 Intended Use
The K2L MOST150 C-O Converter is intended to be used for connecting optical tools or
devices to a MOST150 system basing on a coax electrical physical layer (cPHY).
1.2 Scope of Delivery
The delivery covers the following:

MOST150 C-O Converter

Very short optical MOST cable

Coaxial cable

Power adapter cable for use together with OptoLyzer OL3150o / OptoLyzer MOCCA compact V3.1

Power supply (optional)
Check your shipment for completeness. If you have any complaints direct them to
Sales@K2L.de . Providing the delivery note number eases the handling.
1.3 Restrictions

The MOST150 C-O Converter does not contain any kind of PLL or signal recovery. As a
consequence this tool does not completely pass all MOST physical layer compliance tests.

The MOST150 C-O Converter cannot be used for physical layer tests.

The MOST150 C-O Converter can only be used for system test setups and demo setups.

The MOST150 C-O Converter and an optical tool have to be connected using a specific very short
optical cable without couplers. The very short optical cable is part of the shipment.