5
SADDLE
SYSTEM AIR PURGE PROCEDURE
IMPORTANT: BEFORE FIRST USE
Perform the following Air Purge Procedure to remove any air that may have been introduced into the hydraulic
system as a result of product shipment and handling. This step is to be completed without any weight on the
jack.
20
7 6 5
13
4
3
18
17
2. Pump handle (6) eight full strokes.
1. Turn release valve (R25) counterclockwise one
full turn to the open position.
3. Turn release valve (R25) clockwise to the closed
position.
R25
R25
4. Pump handle (6) until the ram reaches about half
height; continue to pump several times to remove
trapped air in the ram.
ASSEMBLY
T4
T5
T6
1 2
6
6
T7
T8
1. Mount the four angle brackets (T4x4) to the saddle
using screws (T5x4), washers (T6x8), spring
washers (T7x4) and nuts (T8x4). Attach the hook
guide (13) to the saddle with washer (5), spring
washer (6) and nut (7) and assemble the chain
hook-to-hook guide (13) with two screws (4) and
washers (3). And then tighten screw (17) through
the chain to the saddle with washers (18), spring
washers (1) and nuts (2).
Summary of Contents for KTI-63500A
Page 9: ...9 PARTS BREAKDOWN ...