background image

 

Nov 2016

TROUBLESHOOTING

Important:

 Service jacks are self-contained devices used for lifting, but not sustaining, a partial vehicular load. In accordance with ASME-PALD Load 

Sustaining Test: “A load not less than the rated capacity…shall not lower more than 1/8" (3.18mm) in the 

 minute, nor a total of .1875" (4.76mm) in 10 

minutes.” Lowering within this range is considered normal operation and is NOT a warrantable defect.

PROBLEM: UNIT WILL NOT LIFT RATED LOAD.
ACTION:

 

Purge air from hydraulic system by following procedure under SETUP.

PROBLEM: UNIT WILL NOT SUSTAIN RATED LOAD OR FEELS "SPONGY" UNDER RATED LOAD.
ACTION:

 Purge air from hydraulic system as above.

 

PROBLEM: UNIT WILL NOT LIFT TO FULL HEIGHT.
ACTION:

 

Purge air from hydraulic system as above or check oil level in reservoir.

PROBLEM: HANDLE TENDS TO RAISE UP WHILE THE UNIT IS UNDER RATED LOAD.
ACTION:

 

Pump the handle rapidly several times to push oil past ball valves in power unit.

PROBLEM: UNIT STILL DOES NOT OPERATE.
ACTION:

 

Contact your place of purchase for details on handling warranty.

K-Tool International 1 Year Limited Warranty 

K-Tool International Lifting Equipment is warranted to be free from defects in material and workmanship within one year from the date of 
original purchase.  This warranty is extended to the original retail purchaser only.  If any jack or service-related item proves to be 
defective during this period, it will be replaced or repaired, at K-Tool International’s option, without charge.  This warranty does not apply 
to damage from accident, overload, misuse or abuse, nor does it apply to any equipment which has been altered or used with special 
attachments other than those recommended.  This warranty does not cover repairs made by anyone who is not a K-Tool International 

Authorized Repair Center.

All Standard Duty jacks or service-related equipment will be replaced or repaired at K-Tool International’s option during the 1 year 
warranty period. 

 

Be certain to include

 your name, address and phone number along with proof-of-purchase information, and a brief description of the alleged defect.  The

 product will be returned to the customer, freight prepaid.

In

Many alleged defectives may simple be handled by calling K-Tool International Warranty Repair Center for parts.

 no event shall K-Tool International be liable for incidental or consequential damages.  The liability on any claim for loss or damage 

arising out of the sale, resale or use of a jack or related service equipment, shall in no event exceed the purchase price. 

 

SOME STATES 

DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION 
MAY NOT APPLY TO YOU.

THIS WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY PROVIDED IN CONNECTION WITH THE SALE OF K-TOOL 
INTERNATIONAL PROFESSIONAL LIFTING EQUIPMENT. 

 

ALL OTHER WARRANTIES, INCLUDING ANY IMPLIED WARRANTIES OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED. THIS WARRANTY GIVES YOU SPECIFIC LEGAL 
RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

WARRANTY HANDLING PROCEDURES & GUIDELINES FOR KTI STANDARD DUTY SERIES 

                           During the 1 year warranty period, all alleged defective products and/or parts must be shipped, freight prepaid, along 
with proof of date-of-purchase, to K-Tool International Warranty Repair Center (contact information listed below).

31111 Old Wixom Road

Wixom, Michigan 48393

Ph.800.762.6002

2.    The trolley jack  must be lubricated periodically in order to prevent premature wearing of parts. 

 

A general purpose grease must be

 

applied to caster wheels, front axle, elevator arm, handle base pivot bolts, release mechanism and all other bearing surfaces.   

 

Worn parts resulting from inadequate or no lubrication are not eligible for warranty consideration. 

IMPORTANT:

  In order to 

 

prevent seal damage and jack failure, never use alchol, hydraulic brake 

 or transmission oil in the jack. 

 

Use hydraulic jack oil,

 

a light turbine oil, Chevron AW ISO 32 or Unocal Unax AW 150. 

3.  Every owner is responsible for keeping the labels clean and readable.  Use a  mild soap solution to wash external surfaces of the 

devices but not any moving hydraulic components.

 

4.  Inspect both devises before each use. Do not use if any component is cracked, broken, bent, or shows sign of damage. Do not 

he 

jack is subjected to shock load, discard the jack and do not use again.

 
 

5.  Do not attempt to make any hydraulic repairs unless you are a 

 hydraulic repair person that is familiar with this 

 

equipment.

Summary of Contents for KTI-63097















Reviews: