OWN-003 Model BDI Owner’s Manual – Blender Dispenser with Ice
3
Section 1: Important Safeguards___________________________________
READ ALL INSTRUCTIONS CAREFULLY BEFORE USING YOUR BDI MODEL UNIT
.
1.1
Safety Certification
BDI models 501, 503, 505, 506, 507, 508, 509 & 510 are certified by ETL to
comply with UL/ANSI standard 763-2000, 3
rd
Edition, November 30, 2000 and to
comply with CSA standard C22.2 No. 195-M1987.
BDI models 502 and 504 are 240VAC versions that are not currently certified.
1.2 Health
Certification
All BDI models are certified by NSF International to comply with Standard 8.
1.3 Precautions
•
Avoid Contact with Moving Parts
•
Keep fingers, hair, hands and clothing away from all moving parts.
•
Keep utensils away from drive socket, ice augers and blender blades during
operation. Metal utensils will damage blades and augers.
•
NEVER place a jar into the drive socket if the blender motor is operating.
•
DO NOT rock the blender jar while it is operating. Keep the blender jar
straight up until the operation is complete.
•
These precautions will prevent personal injury and/or damage to the blender
dispenser.
1.4
Power Cord Precautions
•
DO NOT operate with a damaged power cord or plug.
•
If the power cord or plug are damaged they must be replaced by the
manufacturer or its authorized service agent in order to prevent any hazard.
•
Do not let the power cord hang over the edge of the work surface.
•
NEVER use an extension cord with the unit.
•
Unplug the unit when changing location, servicing or sanitizing.
1.5
DO NOT Attempt to perform repairs. Never remove the covers or panels on the
unit (with the exception of the lower rear panel to access water and product lines).
The unit does not contain adjustable or customer serviceable parts. The
manufacturer or their authorized agent must perform all interior service and
adjustments. Removing covers or panels, or attempting to effect repairs, will void
the warranty.
1.6
Turn the unit off when not in use.
1.7
NEVER operate the unit if it appears to be damaged. If the unit malfunctions, call
the manufacturer first. If it is dropped or damaged in any way, call for service to
evaluate the extent of damage and the possibility of either repair or replacement.
1.8
Never operate in liquid. DO NOT allow the unit to sit in a pool of liquid or use
the unit outdoors where it will be subject to precipitation.
