Instruction Manual - G85
19
6.3 RS232
The RS232 option is for serial communication and data logging of the
temperature and
alarm conditions.
Follow these steps to navigate in the RS232 option.
Action
Key
Display
Press and hold UP+DOWN key for
3 seconds to enter the menu.
The option "UNIT" will appear in
the display.
Press DOWN key until the option
“RS232” appears in the display.
Press and hold setpoint key to
change values.
While holding the setpoint key in,
press either the arrow UP or arrow
DOWN key to select between
"ON" and "OFF".
“OFF”: The RS232 function is
turned off.
“ON”: Data is send once every two
seconds.
When the required setting is
activated, let go of the setpoint
key.
Press and hold UP+DOWN key for
3 seconds to exit the menu.
Data logging the temperature valves during use
Note
The use of this function warrants extra equipment software.
The parameters on or off will not affect
normal usage when serial communication is not connected.
