AV1 User Manual
10
5
Maintenance
All surfaces should be cleaned with a 70% alcohol solution on a clean cloth or lint-
free paper towel.
1. Clean all components by wiping gently with gauze. To remove fingerprints or oil
smudges, wipe with gauze slightly moistened with a mixture of ether (70%) and
alcohol (30%).
Since solvents such as alcohol are highly flammable, it must be handled
carefully. Be sure to keep these chemicals away from open flames or potential
sources of ignition – for example, electrical equipment that is being switched
on or off. Also remember to always use these chemicals only in a well
ventilated room.
2. If smudges are difficult to clean, wipe them with a soft cloth slightly moistened with a
diluted neutral detergent.
6 Technical data AV1
Material ................................................................................................................... Stainless steel
Weight AV1 ................................................................... .......... .............................................100Kg
Stainless steel plate AV1............................................................................................1200x800 mm
Height of table plate ...................... ......................................................................................780 mm
Undamped frequency ............................................................................................................< 4 Hz
Maximum deflection. ....................... ......................................................................................22 mm
Mass (to be dampened) .............. ......................................................................................15-72 Kg
