12
The range hood must not be
fitted above stoves with a
radiant top plate.
We recommend that at least
two people install this hood.
NOTE: Your Range Hood should only be fitted on a wall. Do
NOT position it any less than 28” above the hob.
1)
Remove the metal anti-grease filters
(See figure at right).
2)
Position the hood against the wall and mark the position of the support
holes that are to be drilled as shown in the figure below. These support
holes can be found on Fig. 4 on next page marked as ‘D’ with the anchoring
holes marked as ‘E’ (Fig. 4 on next page). If you hood comes with an
attached jig, use that as a guide to make the marks for the screw holes.
INSTALLATION INSTRUCTIONS
– Installing your Range Hood
PLEASE NOTE THAT YOU WILL HAVE
TO DECIDE BEFORE INSTALLING YOUR
RANGE HOOD THAT YOU CAN ADAPT
IT AS AN EXTRACTION FAN. PLEASE
SEE PAGE 18 NOW TO UNDERSTAND
CRUCIAL DIFFERENCES IN THESE.
