9 of 16
Installation
(Continued)
Mounting Hose the Reel
1. Check the
TAP-TO-REEL
HOSE
can reach your
tap prior to installing the
MOUNTING BRACKET
2. Mark inside the centre of
each of the bracket holes
to prepare for drilling
3. Use the table below to
select the correct drill
bit for your
Hose Reel
®
It is very important to use the correct size drill bit, for
a very secure fit of the
MOUNTING BRACKET
SLEEVE
14.0mm
MASONRY DRILL
14.0mm
BOLT
15.0mm
MAX 2m
Attaching the Tap-to-Reel Hose
®
To connect the hose reel
to a tap, first assemble
the Tap-to-Reel Hose
onto the side inlet
®
Use a 17mm or shifting
spanner to ensure the hose
is tight and leak-free