When you have changed the settings you can store the new settings by pressing the
[F]
button. It
will go directly to the next setting. To go back to the operation mode press the
[PTT]
button.
3.13.1 Squelch level
When ‘squelch’ is selected in the ‘menu’ the LCD display will show ‘SL’ and the
icon is
blinking.
With the
[down]
and
[up]
buttons you can select the
‘squelch’ level. There are six squelch levels:
off / 0-6. Press the
[F]
button to store the new settings and to go to the next function. To go back to
the operation mode after storing the new settings press the
[PTT]
button.
3.13.2 Battery power save
When the ‘battery power save’ function is selected in the ‘menu’ the LCD display will show ‘PS’.
With the
[down]
and
[up]
buttons you can select
the ‘battery power save’ leverl. There are four
battery power levels: off / 0-4. Press the
[F]
button to store the new settings and to go to the next
function. To go back to the operation mode after storing the new settings press the
[PTT]
button.
3.13.2 Beep tone
When the ‘beep tone’ function is selected in the ‘menu’ the LCD display will show ‘bP’. With the
[down]
and
[up]
buttons you can swtich on or off the ‘beep tone’.
bP.oF = beep tone is deactivated
bP.oN = beep tone is activated. You will now hear a beep tone when a button is pushed, with
exception of the
[PTT]
and
[SQ]
buttons.
3.14 Battery indicator
The
icon in the LCD display shows the battery capacity level. When the battery capacity is low,
the battery icon will be and the red LED starts blinking.
NOTE!
If the
‘beep tone’ is activated it will give a warning tone every 10 seconds when the battery
voltage is low.
