3.10 Transmitting power
Press the
[up]
button for approximately 3 seconds to select the transmitting output power.
The display will show
‘
H
’ or ‘
L
’.
FM: L (low) = 1W, H (high) = 4W
AM: L (low) = 1W, H (high) = 3W
3.11 Roger beep
The ‘roger beep’ function will give a beep tone when the
[PTT]
button is released.
Press
and hold the
[F]
and
[up]
buttons simultaneously to activate the
‘roger beep’ tone. The LCD
display will show the
icon.
Press
and hold the
[F]
and
[up]
buttons simultaneously to de-activate the
‘roger beep’ tone. The
icon will disappear from the LCD display.
3.12 Dual watch
The
‘dual watch’ function will scan between the selected channel of operation and the priority
(emergency) channel.
Press
the
[P]
button for approximately 3 seconds to
activate the ‘dual watch’ function. The LCD
display will show the ‘d’ and
icons.
Press
the
[P]
button for approximately 3 seconds to de-
activate the ‘dual watch’ function. The ‘d’
and
icons will disappear from the LCD display.
NOTE!
When a signal is received the radio will stop scanning and stays on the channel of
reception. When the signal disappears it will continue to scan after 5 seconds, except when the
[PTT]
button is pressed or when the radio receives a signal again.
During ‘dual watch’ all buttons will be disabled, with exception of the
[PTT]
,
[SQ]
and
[P]
buttons.
3.13 Menu function
In the
‘menu’ you can change the ‘squelch’ level, ‘battery power save’ level and ‘beep tone’ settings.
To enter the menu function press
and hold the
[F]
and
[down]
buttons simultaneously. The LCD
display will show the ‘M’ icon.
With the
[F]
button you can select the function that you want to change. With the
[down]
and
[up]
buttons you can change the settings of the selected function.
