Document/Revision No. IM-EN-SDGEN2-BP 1.02 Effective: December 2, 2014
24
4.12 Inserting Wash Nozzle
Insert the wash nozzle as instructed in the following illustrations: For more thorough
instructions, please refer to K-Patents user documentation or visit the K-Patents website to
see the instructional video on inserting and removing the sensor (www.kpatents.com,
PR-23-SD Safe-Drive
®
Operation Guide Video).
WARNING:
Always shut the main steam valve before performing any work on the
wash nozzle.
Check the nozzle and valve
before installing the wash
nozzle. Use thread seal tape
for all thread connections.
1. Insert the nozzle into the
isolation valve (
1
).
2. Attach the nozzle to the
nozzle guide with one
M5x10 screw (
2
) using a
5 mm allen key.
3. Remove the safety pin
(
3
).
4. Close the 1/4” check port
valve under the nozzle
isolation valve (
1
).
5. Open the isolation
valve (
2
) by turning the
handle counterclockwise.
6. Push the nozzle to the
process (
3
).
7. Attach the nozzle to the
nozzle guide with one
M5x10 screw (
4
) using a
4mm allen key.
8. Lock the isolation valvle
handle with the safety
pin (
5
).
1
3
2
!
1
5
4
3
2
CLOSE
OPEN
