Document/Revision No. IM-EN-SDGEN2-BP 1.02 Effective: December 2, 2014
12
Valve handle always
positioned at top
Widest bayonet lug
always positioned at top
Figure 9
Reassembling valve on vertical and horizontal pipes
●
Make sure that the SDI2 valve handle and the largest bayonet connection are on top.
Otherwise, you will not be able to insert the sensor in its place.
●
Tighten the bolts to a torque of 36 N-m (26 lb-ft) with an 8 mm (5/16”) allen key.
WARNING:
Always shut the main steam valve before performing any work on the
wash nozzle.
To re-install the wash nozzle assembly
1. Insert the wash nozzle assembly to its place (
1
).
2. Place the nozzle guide plate in the correct position and tighten the two (2) M5 bolts (
2
).
3. Secure the wash nozzle with a locking plate (
3
,
4
).
