K-Patents PR-33-S, Instruction Manual

Page: 14 / 52

8
PR-33-S instruction manual
Document/Revision No. Rev. 1.42 Effective: February 19, 2019
IP = 192.168.33.1 IP = 192.168.33.2 IP = 192.168.33.3
IP = 192.168.33.100
netmask = 255.255.255.0
PoE
sw
itch
Figure 2.6 A network of PR-33 sensors.
Note: There are no settings for subnet mask, default gateway or name servers in PR-33,
as these settings are not required.
2.3 Testing the Ethernet connection
When you connect the sensor to a powered PoE switch, the indicator lights should light
up. The actual position and function of the lights depend on the switch, but figure 2.7
shows the indicators on a typical PoE switch. There’s one indicator showing that the
instrument is drawing power, another indicator (next to the Ethernet connector) shows
the connection status. In this case a 100 Mbit/s connection is formed between two
instruments at the switch ports 1 and 3 (a sensor per port), and there is a PoE device
connected in these ports, 1 and 3.
1
2
3
4
P
o
E
F
A
U
L
T
P
W
R
2
1
0
0
0
M
1
0
0
M
P
W
R
1
4 2
3 1 5 7
6 8
Figure 2.7 An example of PoE switch indicator lights