2.
Pairing the headset with Bluetooth devices
1) How to enter pairing mode
Functions
Operation
LED indicator
Entering
pairing
mode
Ensure the headset is off,
otherwise please turn it off first.
And then press and hold MFB
button about 8 seconds until red
and blue LED flash alternately
Red and blue LED
flash alternately
Remark: Pairing mode will last 2 minutes. If no devices can be connected
after 2 minutes, it will return to standby mode automatically.
2) Pairing headset with Bluetooth cell phone via Bluetooth
Prior to using the headset for the first time, you have to pair it with a
Bluetooth-enabled cell phone. The pairing procedures are subject to
different models of cell phones. Please refer to your cell phone user’s
manual for further information. The general pairing procedures are as
follows:
1)
Keep your headset and phone within 1 meter when pairing;
2)
Make the headset enter pairing mode (please refer to “How to enter
pairing mode);
3)
Activate your cell phone’s Bluetooth function and set your cell phone to
search for Bluetooth devices within range, and select “BTH026N” from
the list of devices shown;
4)
According to the indication, enter password or PIN No: “0000”. (
If the
mobile phone supports Bluetooth V2.1, password is not required.). If
prompted by your cell phone to connect, select “Yes” (this will vary
among cell phone models);
5)
After successful paired, choose and connect “BTH026N” from the list of
devices shown on cell phone;
6)
After successful connecting, blue LED of headset flashes twice every 4
seconds
Remarks:
If pairing is failed, please turn off the headset first and then re-pair
according to steps 1
～
6 mentioned above.
4
