Remarks:
If pairing is failed, please turn off the headset first and then re-pair
according to steps 1
～
6 mentioned above.
After pairing is successful, the headset and the cell phone will remember
each other, they will no need to re-pair next time.
Every time the headset is turned on, it will connect to last connected
device automatically. If you want to pair it with other devices, please turn
off the Bluetooth function of last connected devices first and pair the
headset with the new device according to steps 1
～
6 mentioned above.
If the Bluetooth version of your cell phone is V2.1 and above, it will no
need to enter pairing password when the headset pairs with your cell
phone, they will match automatically.
Pairing the headset with a Bluetooth transmitter
You can connect the headset to a Bluetooth transmitter to enjoy music
wirelessly. Hereby take BTT001 iPod Bluetooth transmitter for example. The
pairing procedures are as follows:
1)
Place the headset and the Bluetooth transmitter where they are easily
viewable by no more than 1 meter apart;
2)
Enter the headset’s pairing mode (Please refer to “How to enter pairing
mode);
3)
Turn on Bluetooth transmitter. It will search for Bluetooth devices
automatically and send a pairing request;
4)
When the headset requests to enter a PIN No., the transmitter will
response “0000” automatically;
5)
After successful pairing and connecting, blue LED will flash twice every 5
seconds.
Remarks:
The pairing password of the headset is “0000”. So, the headset can only
pair with a Bluetooth transmitter whose pairing password is “0000”.
If pairing still fails after several tries, please refer to the Bluetooth
transmitter’s user’s manual for further information.
