How to use
1.
Turning on/off the headset
Function Operation
LED
indicator Indication
tone
Turning on
the headset
Press and hold MFB for
3
～
5 seconds until blue
LED flashes
Blue LED is on
for 1 second
A long “DI” tone
Turning off
the headset
Press and hold MFB for
3
～
5 seconds until red
LED flashes
Red LED is on
for 1 second
A long “DI” tone
Remark:
In order to save power, the headset will turn off automatically if no
devices can be connected after 5 minutes.
2.
Pairing the headset with Bluetooth devices
How to enter pairing mode
Function Operation
LED
indicator
Indication tone
Entering
pairing
mode
Ensure the headset is
turned off, otherwise turn
it off first and then press
and hold MFB for 5
～
7
seconds until LED flashes
red and blue alternately
LED flashes
red and blue
alternately
Two short “DU”
tones
Remark:
Pairing mode will last 2 minutes. If the headset still can’t pair with any
Bluetooth devices after 2 minutes, it will switch into standby mode
automatically in order to save power.
Pairing the headset with a Bluetooth cell phone
Prior to using the headset for the first time, you have to pair it with a
Bluetooth-enabled cell phone. The pairing procedures are subject to different
models of cell phones. Please refer to your cell phone user’s manual for further
information. The general pairing procedures are as follows:
1) Place the headset and Bluetooth cell phone where they are easily
viewable by no more than 1 meter apart;
2) Enter the headset’s pairing mode (please refer to “How to enter pairing
mode);
3) Activate your cell phone’s Bluetooth function and set your cell phone to
search for Bluetooth devices. After the search is completed, select
“BTH010” from the Bluetooth device list;
4) According to the indication, enter password or PIN No:”0000” and press ”
Yes” or “confirm”;
5) After successful pairing, select “BTH010” in the Bluetooth device list, and
press “connect”.
6) After successful connecting, blue LED flashes twice every 5 seconds.
