25
2740T TRASHCUTTER OPERATOR & SAFETY MANUAL
SETTING & ADJUSTMENTS
Before adjusting in
the field
YOU MUST:
- Lower machine to ground level
OR;
- Place machine in raised position & engage all safety locks.
- Shut down engine.
SPEED RANGE
- 15-18 km/hr
SLOW DOWN
in terrain such as rocks or other difficult
operating conditions.
WARNING:
Use of machine beyond its limits or intent of
operation will void warranty.
IN FIELD SETUP FOR 9M(30FT) 12M (40FT)
MACHINES
1. Set machine in working position.
2. Fully extend tilt rams.
3. In hard soils increase hydraulic disc down pressure to
bring outer wing wheels 50-100mm above ground.
*NB In soft soils it is not necessary to raise outer wheels
above ground level.
4. Operate machine with accumulator indicator between
5-8
(figure 28)
5. Adjust the front of the lay flat bars to sit between
50-100mm above ground level.
(
see figure 27
)
6. Adjust rear of lay flat bars to on or just above ground
surface.
(see figure 27)
IT IS THE RESPONSIBILITY OF THE OPERATORS TO:
Read and understand your manual.
Take time to familiarize yourself with the operation of this machine,
particularly the safety signs and devices fitted to this machine.
F I E L D O P E R A T I O N
Figure 27
Figure 28
Lay flat bar adjustment
Laybar
Rear height adjustment
Coulter disc down pressure
accumulator indicator
new 2740 trashcutter op & safety manual.indd 25
new 2740 trashcutter op & safety manual.indd 25
6/12/2019 7:07:02 PM
6/12/2019 7:07:02 PM
