K-Line CROP CADET SG60T, Operating & Safety Manual

Page: 29 / 48

29
SG60 SEEDER CROP CADET OPERATOR & SAFETY MANUAL
S E E D E R S T A R T - U P T I P S S E E D E R S T A R T - U P T I P S
THIS IS A GUIDE ONLY AND MUST BE READ IN CONJUNCTION WITH
PARTS MANUAL
1) TILT ADJUSTMENT
• To adjust - turn top link between drawbar sections. Ensure tine toolbars are level front to
back when at desired depth, then lock top link.
2) SPEED RANGE
• Refer to seed-box supplier recommendations.
HEADLANDS/ TURNING
• Always raise machine when on headlands and when turning.
3) ROAD TRAVEL SPEED LIMIT
• 32kmh (20mph)
4) WING LEVELLING
• Wings should be pre-set to be level with centre frame when supported by wheels, however
if adjustment required:
- Unfold machine on level ground
- Ensure wing wheel cylinders are not locked out
- Fully raise machine with wheels (RED)
- Ensure cylinders have all reached full stroke (equal length of exposed rod)
- check level of centre frame toolbars with wing toolbars, with a spirit level
- Use M48 nuts on wing wheel lug to adust in/out as required (may need to chock frame &
raise wheels to do this)
- Once wings are level with centre frame, ensure M48 nyloc nut & hex nut (used as a locking
nut) are tightened
- Wing levelling adjustment required if centre frame wheel lugs have spacers installed (to
increase transport clearance).