2
Introducing the K-Drill
Ice Auger System
Efficiency and light weight performance best
describes the K-Drill Ice Auger. Both the 6”
and 8” K-Drill Ice Augers are designed to be
driven with rechargeable electric drills or
gas power heads. The unique center tip and
high carbon steel chipper blades allow for
quick and clean holes under all ice conditions.
K-Drill will also work exceptionally well when
re-opening existing holes.
The K-Drill has its own flotation system to
prevent it from sinking down the hole if it
should come detached from the drill.
The K-Drill Ice Auger requires a 1⁄2 inch drill
with a side-arm. See the detailed cordless drill
requirements on page 11.
CAUTION - Always place protective cover over blades when not drilling.
Keep the electric drill assembly out of the water.
IMPORTANT - At the end of the ice fishing season, before storing for summer,
please spray WD-40 on the blades. This simple maintenance prevents rusting
during storage. Also, K-Drill offers free blade sharpening. See page 9 for details.
