KNX/EIB
Switch Actuator with Secure
28
4.4.2. Parameter window “X: Preset”
This parameter window as shown in Fig. 4.4.2 when the parameter “Function of ‘preset’ for switch”
is enabled in the parameter window “X: Function”.
Fig. 4.4.2 Parameter window “X: Preset”
It is able to not only recall the preset value, but also save the new value of the current switch status
by the bus.
There are 2 objects to recall and save the preset value, and 2 optional preset values (telegram "0"
and telegram "1"). It means “telegram "0"” with “0”, and “telegram "1"” with “1”.
Parameter “Output status of the telegram "0"”
This parameter defines the relay status when recalling the preset value “telegram “0” ” (that is
when the object “Recall preset” receives the telegram “0”) by setting the communication object “Recall
preset”. Options:
None
Contact close
Contact open
Parameter “Output status of the telegram "1"”
This parameter defines the relay status when recalling the preset value “telegram “1” ” (that is
when the object “Recall preset” receives the telegram “1”) by setting the communication object “Recall
preset”. Options:
Contact open
Contact close
Last position of contact
Same as the telegram "0"
