K-array Redline KMT21, User Manual

Page: 13 / 28

REV. A
KMT21
13
The Output page allows users to independently control
the amplitude of the signal routed to the Subwoofer, the
Speaker Output and the XLR DSP Output.
Two Preset pages allow users to load presets stored
on-board. The arrow buttons on the top right corner
of the screen provide access to the Factory and User
preset pages. The arrows are also used to scroll
through, select and load one of the available presets.
The Info page contains information about the current
software and firmware, and the Logical ID of the KMT
module. The Logical ID is automatically assigned
to the KMT unit when connected to a K-Framework
network.
Three Routing pages allow users to manage the rou-
ting of the four input channels to the three outputs
(Subwoofer, Speaker Out and XLR DSP Out) as well
independently set output volume and delay for each
output.
The delay values set in the Routing pages are summed
to the global delay assigned on the Delay page.
The arrow buttons on the top right corner of the scre-
en provide access to individual Routing pages for the
Subwoofer, Speaker Out and XLR DSP Out.
Notes: The XLR DSP page does not provide control
over delay for this output.
OUTPUT PAGE
PRESET PAGES
INFO PAGE
ROUTING PAGES
The Input page allows users to independently manage
the amplitude of all the four input channels
INPUT PAGE
HOME PAGE
8.5 TOUCH SCREEN FUNCTIONS
To reach the Home page from any other page,
touch the Home button.
The main functions of the onboard DSP can be
managed with the integrated touch screen. Functions
are grouped into six pages, shown as icons on the
Home page.