K-array Lyzard-KZ14I, User Manual

Page: 6 / 19

4
1.
Unpacking
Each K-array product is built to the highest standards
and thoroughly inspected before leaving the factory.
Upon arrival, carefully inspect the shipping package.
If you find any damage, immediately notify the
shipping company. Check that the following parts are
supplied within the package:
(fig.1)
A. 1x Lyzard-KZ14 I 1x Lyzard-KZ14R I loudspeaker
with cable* the cable is directly connected to
the speaker through a 2mm euroblock connector
inside the speaker’s rear panel.
B. 1 x little magnet included for easy grille
removable.
C. 2mm flat-blade screwdriver.
D. 1 x adhesive gel pad
E. 1 x screw and dowel 2mm. ca
F. 1 x Drilling template (part of the package design)
The accessories provided within the packaging
allows an easy installation in any application, either in
permanent or a temporary setup.
* The cable is terminated with an euroblock connector only when the
speaker is part of an AZIMUT system.
Seated listening area
H: min height 1,5 m (5 ft) / max height 2,5 m (8¼ ft)
D: min distance: 2,5 m (8¼ ft)
Standing listening area
H: min height 1,7 m (5” ft) / max height 2,7 m (9 ft)
D: min distance: 2,5 m (8¼ ft)
Setup
Lyzard-KZ14 I performs best when positioned on a
planar surface such as a wall. Find the proper installation
height, aiming the loudspeaker at the listening position.
We suggest the following configurations:
(fig.2, 2.1)
A.
B.
C.
D.
E.
F.
2.
1
2
Lyzard-KZ14 I
D
D
H
H