9
Output configuration
Once connected to the Kommander-KA amplifier (see
paragraph “K-array Connect Mobile App”, page 7) the
output configuration can be performed either using the
on-board web interface or with the K-array Connect app, as
described below.
A. Touch the Preset tab in the tab menu at the bottom
of the screen: this will modify the buttons in the list of
available devices.
B. Select the device you want to configure and touch the
button to enter the Output Configuration page.
Signal Routing
Kommander-KA 4-channel units feature direct line output hard-
wired to the inputs. Analog input signals on both 4-channel
and 8-channel amplifiers can be freely routed to the output
channels (speaker output) via the built-in DSP matrix.
Signal routing can be configured either with the on-board
web app or with the K-array Connect app, as described
below.
1. Touch the Routing tab in the tab menu at the bottom
of the screen: this will modify the buttons in the list of
available devices.
C. In the Output Configuration page fill in the field according
to the actual loudspeakers configuration: match the
loudspeakers models and quantities connected to the
Kommander-KA output connectors.
D. Once completed, save the output configuration
touching the APPLY button at the bottom of the page.
2. Select the device you want to configure and touch the
button to enter the Routing table page.
3. Touch the squares in order to toggle the connection
among the input channels on the left side to the output
channels in the top side.
Kommander-KA
User Guide
IN1 routed to OUT1
IN1 not routed to OUT1
P R E L I M I N A R Y
