K-array KH4, User Manual

Page: 9 / 32

KH4 and KS4 have a powerful DSP that manages all the functions of the speakers. Each system can store on board 16 preset that
can be recalled pushing the PRESET button. Once the preset will appear on the lower line of the display it will become automatically
available after few seconds. If you desire to set a preset as “ default ” you just need, once selected it, to keep pressed for five seconds
the PRESET button. After that, this preset will automatically be recall each time you will switch on your module. It is also possible to
remote each module by an RS485 serial port. In order to remote your system, you need to set each module on a different address, so
that, in your chain, no one module will have the same address. Two rotary encoders allow you to set the desired address number that
will appear on the top line of the display. Using the remote control software it is possible to mute each system, select a desired preset
loaded on-board or download a new preset pack.
For remote control operation please refer to REMOTE CONTROL AND SOFTWARE MANUAL in the next pages.
ADDRESS FOR REMOTE CONTROL
FROM PC OR PREVIOUS MODULE
TO NEXT MODULE
PRESET LOADED
ADDRESS X 10
PRESET SCROLL
RESET BUTTON
ADDRESS X 1
8. DSP CONTROL & REMOTE CONTROL
P. 9 USER'S MANUAL
8.1 Cloner function & preset systems
It is possible to clone the entire presets bank from Speaker to Speaker without any PC connected. We will call SpeakerA
the one with the presets bank that you want clone, and SpeakerB the one that will be upgraded.
Set the SpeakerA on ID 99, will appear CLONER on the display
Keep SpeakerB on any ID number between 10 and 90.
Turn off both the speakers and connect by a RJ45 8 poles cable
Turn on the SpeakerB and after the SpeakerA
SpeakerA will start to clone, on the display will appear a cont down (00/15, 01/15, etc)
Wait till 20 seconds after 15/15
Change the ID of the SpeakerA to any other ID and turn off both Speakers
Turning on the SpeakerA check that it is on mode 16x16 and NOT 4x4.
If SpeakerA is in mode 4x4, just turn off the speaker and keep press the Preset button during the turning on
The preset are cloned to the SpeakerB
ID 39
KH4FL01